Don’t Bend Your Break Barrel Rifle
The Umarex USA Service Department typically receives one or two break barrel rifles per week that have upward bent barrels. At first, this might seem like a strange phenomenon. After all, to cock a break barrel rifle, one typically has to pull down on the barrel of the gun, not up. Why, then, would we see so many upward bent barrels?
This upward bending of the barrel occurs when a person has the gun in an open cocked position, safety OFF, and then pulls the trigger. The result of this situation is that the barrel slams shut with extreme force and bends the barrel upwards. After this occurs, the gun may or may not cock depending on what sort of internal damage has occurred. When this situation happens, we suggest not firing the gun again until it has been evaluated by our qualified gunsmiths to see how the problem might be fixed.
The rifle most likely will not be able to be sighted in due to the barrel pointing in a slightly upwards direction. Many times the trigger tongue will be broken and the stock may be cracked at the pistol grip area when the rifle has been discharged in this way. In most situations, our gunsmith can disassemble the rifle and adjust the barrel back to its original position with the use of our barrel press. The barrel press is an extremely large, heavy press that exerts a tremendous amount of force on the barrel to straighten it out. The press itself is a fundamental tool to any quality gunsmith.
The rifle is reassembled and test fired after the barrel is straightened.
After the barrel is adjusted to once again be straight, the rifle is reassembled by our gun techs, and then it goes directly to our shooting range to fire several pellets in order to ensure it will properly sight in. We do initial testing on the gun range and sight the rifle in to be accurate. After the rifle’s quality has been ensured, we take care to properly clean and service the other aspects of the rifle before returning the gun to its rightful owner.
To prevent this situation from ever occurring to you, please always practice safe gun handling, making certain that the gun is on Safe and your finger is not within the trigger guard area until a safe target has been acquired. Only after a target has been sighted should the gun’s safety be moved to the fire position and your trigger finger placed inside the trigger guard area. Following these steps will ensure that your gun is never damaged and no one is injured in the process.
We can be reached between the hours of 8 AM and 5 PM CDT. Please feel free to call us any time at (479) 646-4210 option 7 if you have a question about one of our products or send us an email via our contact us page.
Click The Gunsmith’s Bench for more articles or click the category on the right column.